Pages

Saturday, March 5, 2011

Beginning Throwing week 6: plates

Hi folks,

For next class, please throw 8 plates and keep 2. Plate dimensions are as follows:

  • salad plate:
    • 1 1/2 pounds of clay;
    • bottom is 3/8 inch thick at center, thinner at the edges;
    • 6 1/4 inches diameter inside bottom.
  • dinner plate:
    • 2 1/2 pounds of clay;
    • bottom is 3/8" thick at center, thinner at the edges;
    • 8 1/4 inches inside diameter bottom.

Resources
Potter Emily Owen of Little e Pottery in Austin, Texas (http://www.littleepottery.com/) makes plates:

Part 1
Making Ceramic Plates and Platters : Ceramic Plates & Platters
http://www.youtube.com/watch?v=tgg-qwOXt5w

Part 2
Making Ceramic Plates and Platters : Ceramic Plates & Platters Clay Prep
http://www.youtube.com/watch?v=4RvULYq-5DU

Part 3
Making Ceramic Plates and Platters : Ceramic Plate Clay Centering
http://www.youtube.com/watch?v=bbIVJmfI9So

Part 4
Making Ceramic Plates and Platters : Ceramic Plate Throwing
http://www.youtube.com/watch?v=sNQT_RMF7zg

Part 5
Making Ceramic Plates and Platters : Ceramic Platter Throwing
http://www.youtube.com/watch?v=Daimyu40cbo

Part 6
Making Ceramic Plates and Platters : Ceramic Platter Rim
http://www.youtube.com/watch?v=Q-35UdyFHUM

Part 7
Making Ceramic Plates and Platters : Ceramic Plate & Platter Foot Prep
http://www.youtube.com/watch?v=SLnD70_yvhU

Part 8
Making Ceramic Plates and Platters : Ceramic Plate & Platter Foot Trim
http://www.youtube.com/watch?v=9lUP0wjuNTQ


Have fun!
-Jay

Tuesday, March 1, 2011

Toquerville Pottery: On Showing Up

Toquerville Pottery: On Showing Up: " The other day, a friend stopped by for a visit and asked how my sculpture was coming and my answer was' 'Good, I'm still s..."

Monday, February 28, 2011

Beginning Throwing: Other shapes (Week 5)

For next week:
Please have 2 of any shape leatherhard and ready for finishing.

Resources:
Handout: clay weights & measurements for various pottery shapes
This is the handout from class; includes clay weights and measurements for making a bowl, 12 oz. mug/pitcher, 24 oz. mug/pitcher, bud vase, side plate, dinner plate, and serving bowl.

Next week we'll look at making plates on the potters wheel. Also, hopefully our pots will be bisque fired by then!

Thanks,
Jay

Monday, February 21, 2011

Beginning Throwing class week 4: Glazing

Hi,

For next Beginning Throwing class:
Please continue to finish and glaze 4 bowls and 2 mugs.

Next class, we'll take a look at making other shapes on the potters wheel (big bowls, plates, pitchers, etc.) and some more techniques for glazing.

Glazing resources:

Here is a handout you can print and take with you to the studio on the basic procedure for glazing your pots. Remember to wax the bottom!:



I've found a pretty good series of videos on various glazing techniques by Emily Owen of Little e Pottery in Austin, TX. For some reason, they're out-of-order, but I hope you find them useful anyway:

Little e pottery glazing videos


Cheers,
Jay

Friday, February 11, 2011

Beginning Throwing Week 3: Mugs, handles, and softening and reclaiming clay

http://www.flickr.com/photos/divemasterking2000/ / CC BY 2.0

Next week, we'll glaze the four bowls you've made that have been bisque fired. Please also have 2 mugs ready to bisque fire.

Resources for week 3: 

Mugs
Simon leach throws mugs: http://www.youtube.com/watch?v=A7v_s7kL-Jg

Handles
SIMON LEACH - handling of the mugs
Video of Simon Leach pulling handles for mugs; Simon pull handles while they're on the pot rather than separately, but the principle's the same.

Softening and reclaiming clay
Clay as it comes from the factory is usually too stiff to center easily. It’s often a good idea to soften your clay before use.

The best way to soften clay is by making a sandwich: alternate layers of new clay with very thin layers of slurry from the reclaim bucket (the best slurry for this is at the very bottom of the bucket).

Make the clay+slurry sandwich, bag it, let it age for at least 24 hours, then wedge it. The clay should be just dry enough that it doesn't stick to your hands after it's been thoroughly wedged.

Incidentally, you may reclaim as much clay as you like for free from the slurry bucket. Just set some slurry out on a plaster bat and let it dry to workable consistency. Clay on a plaster bat dries very quickly, so wrap the whole thing (clay and bat) in plastic before you leave the studio for the day.

Friday, February 4, 2011

Beginning wheelthrowing class week 2

Hi folks,


For next class, please have at least 2 bowls on bisque shelf, and 2 bowls leatherhard and ready to trim. If you haven't already, please purchase another 12 pounds of clay form the ACC studio front desk ($12)

Resources:

Drying and finishing your pots

  • cut the piece off as soon as the water has dried from the surface of the bat
  • Let piece stiffen on the bat
  • As soon as the piece is stiff enough to handle without distortion, flip it over so the bottom can dry
  • Dry slowly; wrap in plastic to keep moist (newspaper square top and bottom)
  • Remember to label your piece with your name and the date while it's on the shelf
  • When piece is leatherhard (about the hardness of cheddar cheese)
    • Clean up rough surfaces with a rubber or metal rib and a damp sponge
    • Put the piece on the "to bisque" shelf for bisque firing

Underglaze decoration
The leatherhard stage is also the best time to apply underglaze decoration. Underglazes are located in the glaze room in the cabinet above the sink; brushes are in the drawer to the right of the sink, and small plastic dishes are under the sink in the clay studio.

Simon leach applies slip to pots in a similar way to the way we use underglazes:
Simon leach slip decoration video

    Next class we'll talk about:
    • throwing mugs & making handles
    • softening & reclaiming clay
    Cheers!
    Jay